HS 900GW Ultrasonic Guided Wave Detector

HS 900GW is based on the piezoelectric effect and uses a contact type ultrasonic oblique seam single crystal probe to generate ultrasonic guided waves in metal components for detection.It is suitable for rapid detection of materials such as pipes,bars,and plates.

OEM Service
Customization
Model
HS 900GW

Functional features

  • Portable integrated design,weight is only 2.3KG
  • Transmitting piezoelectric:800V±10%
  • New process-based operation mode,easy to learn and use
  • Multiple view display,A+B;the image is more intuitive
  • The special guided wave probe is used in combination with the pull-wire encoder,with good detection accuracy and high efficiency

Technical parameters

Transmit parameters
Pulse type Negative square wave pulse Pulse front <20 ns
Transmitting pulse voltage 300-800V Impedance matching 200Ω、500Ω
Pulse width 200ns-5000ns continuously adjustable (adjustment step 10ns)
Receiving parameters
Sampling frequency/bits 200MHz/10bits Attenuator accuracy <±1dB/20dB
Sampling depth 512 Gain range 110dB/0.1dB 、2dB 、6dB
Signal bandwidth 0.05MHz~2MHz Sound speed range (0-9000)m/s
Repetition frequency 10Hz-100Hz Horizontal linearity error ≤0.1%
Dynamic range ≥30dB Vertical  linearity  error ≤3%
Scan range Zero interface incidence-6000mm steel longitudinal wave
Comprehensive    performance
Detection waveform Full detection,positive detection,negative detection,RF
Operation mode Single crystal flaw  detection,double crystal flaw detection
Instrument parameters
Instrument size 250×180x75 (mm) Interface USB2.0,VGA,LAN
Instrument weight 3.5Kg(with battery) Ambient temperature (-10-40)℃(reference value)
Display size 8.4" Power supply DC15V/6A ,battery 11.1V/13600mAh
Display resolution 800×600 Relative   humidity   (20-95)%RH
Battery life Work continuously for more than 6 hours(powered by lithium battery)

Online Inquiry